- Home
- Industries
- Pharmaceutical
- Tablet
Tablet Equipment
Tablets are solid dose pharmaceutical preparation containing drug substances usually prepared with the aid of suitable pharmaceutical excipients. It comprises a mixture of active substances and excipients, usually in powder form, pressed or compacted from a powder into a solid dose. Accelerate your drug pipeline from discovery to quality control. RGMTSI offers innovative solutions at every stage of the bio / pharmaceutical pipeline, starting from formulation, granulation, blending, compression or encapsulation, tablet coating and other oral solid dosage processes.
Electronic Tablet Counter with Gross check Weighing and Inspection System
An advanced check-weighing system integrated with the DMC series tablet counters for detection and rejection of broken tablets. Compact and extremely accurate, tare and gross weights of each container are measured before and after filling by means of technologically advanced load cells with an accuracy of 50mg. This allows online rejection of invalid containers when the filled weight exceeds preset allowable weight range. The Tare/Gross weighing stations with servo controlled bottle transfer system can be offered with the DMC120, 60S and 60T tablet counter models.
Electronic Tablet Counter with Gross check Weighing and Inspection System
- Accuracy (based on 150mg tablet weight tolerance within 4%): Up to ½ piece over/undercount detection under 30 counts/bottle, Up to 1 piece over/undercount detection under 100 counts/bottle
- Capacity: Max. 12000 tablets per minute based on diameter 8mm/uncoated tablets. Actual speeds will vary based on bottle neck diameter and the shape and size of the product.
- Bottle size ranges: Diameter 30-100mm, Height 40-200mm
- Dimension: 4,400 (L) x 1,620 (W) x 2,028 (H) mm (DMC120W)
- Net weight: 3,000kg
Star Wheel type Tare and Gross Weighing System
Star Wheel type tare & gross weighing system Tare weight checking process: Weighing tare weight of bottle Filling process: After checking tare weight filling tablet or capsule Gross weight checking process: Weighing total gross weight to verify over or less filling and broken tablet or empty capsule Rejection process: In any case of wrong filling or weight difference caused by broken tablet or empty capsule will be rejected
Star Wheel type Tare and Gross Weighing System
- Measuring time: 0.6s/ +/-1mg
- Bottle diameter range 25-75mm
- Bottle height range 40-200mm
- Capacity up to 40 bottles / min. (Based on Ø 50mm bottle)
265 Series Tablet Press
The 265 Series single-sided high-speed tablet presses can finish the tablet press process in one turret rotation, including filling, dosing, prepressing, pressing and ejecting. These tablet presses feature a modular design. The frame structure of main machine is comprised of a base plate, left and right frames and an upper plate. All cam tracks are attached at the base. Upper cam track, upper pre-compression roller and upper main-press roller are attached to the supporting block. The stable three-column structure is engineered with strong bending and torsion resistance in order to meet the tough loading requirements when these machines operates at a high speeds.
265 Series Tablet Press
- You thought there was a placeholder text here, but it was me DIO!
370 Series Tablet Press
The 370 Series single-sided high-speed tablet presses can finish the tablet press process in one turret rotation, including filling, dosing, prepressing, pressing and ejecting. These tablet presses feature a modular design. The frame structure of main machine is comprised of a base plate, left and right frames and an upper plate. All cam tracks are attached at the base. Upper cam track, upper pre-compression roller and upper main-press roller are attached to the supporting block. The stable three-column structure is engineered with strong bending and torsion resistance in order to meet the tough loading requirements when these machines operates at a high speeds.
370 Series Tablet Press
- Hydraulic support system is replaced by mechanical support system to help single rotary tablet press to avoid oil leakage.
- This single rotary tablet press is equipped with double impellers type force feeder and the speed of feeder impeller is controlled by PLC. This improves the fluidity and uniformity of materials.
- Our single rotary tablet press adopts double lubrication system. Different parts are equipped with different lubrication systems. This decreases contamination and makes the equipment easy to maintain.
- Main pressure is 100 kN and pre-pressure is 16 kN, so automatic high-speed rotary tablet press is suitable for pressing the material which is hard to press and the irregular tablet with big size. Because of the large main-press roller, product quality can be ensured with long shaping time.
- We have sold 360 GZP/ZPT-265 series tablet presses and 606 GZP/ZPT-370 series tablet presses by 31st December, 2015. We have extensive production experiences and mature technology so our machine can operate stably.
720 Series Tablet Press
720 Series are automatic single-sided high-speed tablet presses featuring three rollers, as well as three compression stations consisting of the same structure and diameter. This multifunctional tablet press has an exchangeable turret and is capable of producing single- and double-layer tablets. The 720 Series single-sided tablet presses are know for their modular structure design and fully meeting GMP requirements. Major components of this machine including a track-, a main-press roller, a pre-compression roller, a feeder and a dosing device which are easy to dismantle, clean and maintain.
720 Series Tablet Press
- You thought there was a placeholder text here, but it was me DIO!
1060 Series Tablet Press
1060 Series high-speed double-sided tablet presses can complete the pressing process twice in one turret rotation, including filling, dosing, prepressing, pressing and ejecting. These tablet presses are ideal for the mass production of tablets. This double-sided tablet press adopts modular structure design. Major components of this machine including track, main-press roller, pre-compression roller, feeder and dosing device are easy to dismantle, clean and maintain. GZPT tablet press fully meets GMP requirements and is capable of producing double-layer and two-tone tablets, as well as round, irregular, engraved and annular tablets.
1060 Series Tablet Press
- D/B/BB/BBS/HLS14 series punches can be used in this machine without changing main machine.
- Electrical control mechanism adopts B&R PCC (program-controlled computer). Compared with traditional PLC (programmable logic controller), it owns stand-out performance in CPU frequency, data storage, scan cycle, programmed language and calculation speed.
- C programming language can realize many functions which can’t be achieved by PLC.
- Automatic double rotary tableting machine adopts communication control system that state of servo can be displayed on screen.
- Expansion I/O adopts modular design so that non-professionals can also maintain and replace it, and there is no limit of numbers of servo motor.
- Our double-sided tablet press is equipped with various interfaces including 232, 485, Ethernet and USB interface.
- Both program and data are stored in CF card.
- Double-sided tablet press is equipped with real-time data acquisition and data backup system.
- Any production records, e-signatures and electronic records are accessible on a computer.
Vision Inspection Tablet Counter
Vision Inspection Tablet Counter Machine can check on every single piece of product subjected to 100-percent vision inspection with single tablet reject prior to filling. With hybrid technology that combines the functions of tablet counting machine and vision inspection system, Vision Inspection Tablet Counter realizes the vision for a better, more ideal counter through ultra-high resolution cameras, tilted revolving disc tablet feeding with servo driven rejecter gate. The Vision Inspection Tablet Counter is capable of processing high-speed product inspection data through twin feeding channels. Vibratory feeders are replaced by a tilted revolving disc that guides the products to a circumferential edge and directly to the vision counting zone. Fast acting reject gate enables single tablet reject instead of removing the entire container from the conveyor.
Vision Inspection Tablet Counter
- Capacity: Max. 10,000 tablets per minute based on diameter 8mm round tablets. Actual speeds will vary based on bottle neck diameter and the shape and size of the product.
- Bottle size ranges: Diameter 30-100mm, Height 40-200mm
- Dimension: 2,800(L) x 1,790(W) x 2,000(H) mm VICOB only / 650(L) x 570(W) x 1,750(H) mm KIOSK only
- Net weight: 1,400kg VICOB only / 120kg KIOSK only
DMC300 Electronic Tablet Counter
Fully automatic tablet/capsule counting and filling machine. Tablets/capsules loaded from the hopper are aligned on a continuously vibrating 3 step trays and fed to the infrared electronic counting sensors. The machine fills the bottle with 100% accuracy. There are 6 independently working filling heads that fill the bottles that are fed by timing screws to achieve 300 bottles per minute. There are also 6 sets of vibrator trays with which the speed is individually adjustable to set for optimum feeding condition. Double rotating tablet shutter design ensures counting accuracy and fastest container handling. All this at the speed of 300 bottles per minute with a footprint of less than 4 square meters (w/o conveyor) makes this machine extremely space efficient.
DMC300 Electronic Tablet Counter
- Capacity: Max. 25,000 tablets per minute based on diameter 8mm round tablets. Actual speeds will vary based on bottle neck diameter and the shape and size of the product.
- Bottle size ranges: Diameter 30-100mm, Height 40-200mm
- Dimension: 5,800(L) x 2,120(W) x 2,000(H) mm with conveyor
- Net weight: 2,300kg
DMC200 Electronic Tablet Counter
Fully automatic tablet/capsule counting and filling machine. Tablets/capsules loaded from the hopper are aligned on a continuously vibrating 3 step trays and fed to the infrared electronic counting sensors. The machine fills the bottle with 100% accuracy. There are 4 independently working filling heads that fill the bottles that are fed by timing screws to achieve 200 bottles per minute. There are also 4 sets of vibrator trays with which the speed is individually adjustable to set for optimum feeding condition. Double rotating tablet shutter design ensures counting accuracy and fastest container handling. All this at the speed of 200 bottles per minute with a footprint of less than 4 square meters (w/o conveyor) makes this machine extremely space efficient.
DMC200 Electronic Tablet Counter
- Capacity: Max. 20000 tablets per minute based on diameter 8mm round tablets. Actual speeds will vary based on bottle neck diameter and the shape and size of the product.
- Bottle size ranges: Diameter 30-100mm, Height 40-200mm
- Dimension: 4,000(L) x 2,000(W) x 2,220(H) mm with conveyor
- Net weight: 1,200kg
DMC120T Electronic Tablet Counter
Fully automatic tablet/capsule counting and filling machine. Tablets/capsules loaded from the hopper are aligned on a continuously vibrating 3 step trays and fed to the infrared electronic counting sensors. The machine fills the bottle with 100% accuracy. The machine has 24 channels with quadruple filling heads and it is suitable for counting small number (typically less than 100 pieces per container) at fast speed. Advanced functions including tablet shutter time check, dark & light time control, self-compensating vibrator control, and sequential shutter closing speed are provided for the ease of operation. Up/down dive-in nozzles with adjustable stroke frequency ensure no escaping tablets and no blockage of large tablets
DMC120T Electronic Tablet Counter
- Capacity: Max. 12,000 tablets per minute based on diameter 8mm round tablets. Actual speeds will vary based on bottle neck diameter and the shape and size of the product.
- Bottle size ranges: Diameter 30-100mm, Height 40-200mm
- Dimension: 4,065(L) x 1,990(W) x 2,028(H) mm
- Net weight: 1,500kg